Non-standard precision mechanical partsprocessing commonly used tips

Non-standard precision mechanical partsprocessing commonly used tips

In the large machinery processing plant non-standard precision mechanical parts processing process, although there are many small skills are very insignificant, but if you can know and master these small skills, will let you get twice the result with half the effort! Here we will introduce a few more commonly used skills in the processing of non-standard precision mechanical parts, let you understand together:

Technique 1:

Remove the pliers and process two M4 threaded holes, level the two 1.5mm thick steel plates with the pliers, riveting the 0.8mm thick hard brass plate with aluminum rivets, and fix them to the pliers with M4 head screws to form a durable soft jaw. This can protect the precision mechanical parts from being broken.

Tip 2:

If the magnet to absorb small precision mechanical parts is not convenient. Can absorb an iron plate under the magnet, it can not only absorb a lot of small precision mechanical parts, but also can pull open the iron plate, small precision mechanical parts will automatically fall into the collection box, very practical.

Tip 3:

If the pulley and the wheel shaft slip, a series of nests can be drawn with ￠ 15~18mm socket drill bit on the wheel shaft, which can form adsorption force and prevent skid.

Tip 4:

The workpiece is generally positioned first and then clamped, but for some workpieces, because clamping will cause deformation of the workpiece. Therefore, for such artifacts, we first have to clamp it and then locate it, find six sites, and find the degrees of freedom that limit it.

Large machinery processing plant attaches great importance to the quality and efficiency of non-standard precision mechanical parts processing, if it can more effectively improve the production and work efficiency without a large cost of manpower and financial resources, then these small skills are also very worthy of praise.

die casting